Siemens SITRANS P DS III Operating Instructions Manual page 214

Technical data
13.6 Construction
Design for absolute pressure (from the differential pressure series), differential pressure and flow rate
Process connection
Electrical connection
Torque for cable gland nut made of
Degree of protection for Han and
M12 connectors
Han 8D is identical to Han 8U.
1)
Construction for level
Weight
as per EN (pressure transmitter
•
with mounting flange, without
tube)
as per ASME (pressure
•
transmitter with mounting flange,
without tube)
Material
Wetted parts materials
•
Plus side
Seal diaphragm on the
•
mounting flange
Sealing surface
•
Sealing material in the pressure
caps
for standard applications
•
for underpressure
•
applications on the mounting
flange
Minus side
Seal diaphragm
•
214
/ -18 NPT female thread and flat connection with
1
4
thread in accordance with EN 61518 or M10 fastening screw thread in accordance
with DIN 19213 (M12 for PN 420 (MAWP 6092 psi))
Screw terminals
Cable inlet using the following cable glands:
Pg 13.5
•
M20 x 1.5
•
½-14 NPT or Han 7D/Han 8D connector
•
M12 connector
•
Plastic
2.5 Nm (1.8 ft lb)
IP65
approx 11 ... 13 kg (24.2 ... 28.7 lb)
approx 11 ... 18 kg (24.2 ... 39.7 lb)
Stainless steel, mat. no. 1.4404/316L, Monel 400, mat. no. 2.4360, Hastelloy B2,
mat. no. 2.4617, Hastelloy C276, mat. no. 2.4819, Hastelloy C4, mat. no. 2.4610,
tantalum, PTFE, ECTFE
smooth as per EN 1092-1, form B1 or ASME B16.5 RF 125 ... 250 AA for stainless
steel 316L, EN 2092-1 form B2 or ASME B16.5 RFSF for the remaining materials
Viton
Copper
Stainless steel, mat. no. 1.4404/316L
/ -20 UNF fastening screw
7
16
1)
Metal
4.2 Nm (3.1 ft lb)
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07
Stainless steel
4.2 Nm (3.1 ft lb)