Siemens SITRANS P DS III Operating Instructions Manual page 194

Technical data
13.2 Input point
Absolute pressure input, with flush-mounted diaphragm
Lower measuring limit
Upper measuring limit
DS III input with PMC connection
Measured variable
Span (continuously
adjustable) or measuring
range, max. operating
pressure and max. test
pressure
Lower measuring limit
Measuring cell with
•
silicone oil filling
2)
Measuring cell with
•
inert liquid
2)
Measuring cell with
•
neobee
2)
Upper measuring limit
1 bar g (14.5 psi g) only in PMC-Style Standard, not in Minibolt
1)
For PMC-Style Minibolt, the span should not be less than 500 mbar
2)
194
HART
1 ... 30 bar a 45 bar a
(14.5 ... (653 psi a)
435 psi a)
Depending on the process connection, the
span may differ from these values
0 bar a (0 psi a)
100% of maximum span
HART
Gauge pressure
Span Maximum
operating
pressure
MAWP (PS)
0.01 ... 4 bar g
1 bar g (58 psi g)
(0.15 ...
14.5 psi g)
1)
0.04 ... 7 bar g
4 bar g (0.58 (102 psi g)
... 58 psi g)
0.16 ... 21 bar g
16 bar g (2.3 (305 psi g)
... 232 psi g)
100 mbar a (1.45 psi a)
100 mbar a (1.45 psi a)
100 mbar a (13.05 psi a)
100% of maximum span
PROFIBUS PA and FOUNDATION Fieldbus
100 bar a 30 bar a
(1450 psi a) (435 psi a)
Depending on the process connection, the
measuring range may differ from these values
100% of max. measuring range
PROFIBUS PA and FOUNDATION Fieldbus
Maximum test Measuring
pressure range
6 bar g 1 bar g
(87 psi g) (14.5 psi g)
10 bar g 4 bar g
(145 psi g) (58 psi g)
32 bar g 16 bar g
(464 psi g) (232 psi g)
100% of max. measuring range
Operating Instructions, 06/2013, A5E00053276-07
45 bar a 100 bar a
(653 psi a) (1450 psi a)
Maximum Maximum test
operating pressure
pressure
4 bar g 6 bar g
(58 psi g) (87 psi g)
1)
7 bar g 10 bar g
(102 psi g) (145 psi g)
21 bar g 32 bar g
(305 psi g) (464 psi g)
SITRANS P DS III with PROFIBUS PA