Table of Contents
Advertisement
8
Connecting a Camera in MPX Mode
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and password if
prompted. The PTZ menu opens.
NOTE
The following message will appear when attempting to access the PTZ menu if the communication
parameters have not been correctly set for your camera. See above for details.
3. Click the arrow in the PTZ control window to show advanced controls.
4. Click
. The OSD menu appears over the camera image.
5. Use the on-screen controls to configure menu items:
• Up / down arrows: Select menu items.
• Left / right arrows: Change value for menu items.
• Cancel: Exit the OSD menu.
• Enter: Enter the menu item.
#LX400062; r.30885/35920; en-US
62
Advertisement
Table of Contents
