Table of Contents
Advertisement
9
Connecting to Cameras with FLIR Cloud™ CMS
2. Click Add Device.
3. Enter the following:
3.1.
Check By IP/Domain to add a camera using the DDNS address.
3.2.
Device Name: Choose a name for your camera of your choice.
3.3.
IP/DDNS Address: Enter the Domain Name/URL Request you received in
the email when you registered for DDNS followed by .myddns-flir.com.
NOTE
For example, if your Domain Name/URL Request is tomsmith, enter tomsmith.myddns-flir.
com
3.4.
Client Port: Enter the camera's Client Port.
3.5.
User Name: Enter the camera's User Name (default: admin).
3.6.
Password: Enter the system's Password (default: admin).
4. Click Add.
5. Click
then
.
#LX400062; r.30885/35920; en-US
70
Advertisement
Table of Contents
