Adjustment Of Adf - Sharp AR-650 Service Handbook

1.22 Adjustment of ADF

1.22.1 Adjustment of skew with ADF
(1) Check that the right hinge is installed as shown below figure.
Note: Fix the screw on the center of scale.
(2) Place the test original face up in the tray, press PRINT to make a copy.
Check that the copy isn't skew.
(3) If there is a skew, loosen the two screws on right/left hinges and adjust the position of RIGHT HINGE.
Repeat the procedure until the skew is rectified.
Note: After the adjustment, tighten the two screws of LEFT and RIGHT HINGE without fail.
LEFT HINGE RIGHT HINGE
ADJUSTMENT
RIGHT HINGE
Clockwise rotation
(CW)
Counterclockwise
rotation
(CCW)
1 - 80
Image Inclination
CCW
CW