1.22.2
Adjustment of ADF horizontal deviation caused for ADF
(1) Make a test original as shown: First draw a
center line on an A4 sized copy paper.
(2) Place the test original on the original feed tray
with the center line side facing up and align the
side guides to the sides of the original.
(3) Press the START key to make a copy. Fold the
copy in half and check that the center line is in
the center of the copy: If it is not, adjust the
original feed tray until the center line is copied
in the center. After adjustment, tighten the two
screws securely to fasten the original feed tray.
1 - 81
Center line
A4 size
Test original
Original feed tray
ADJUSTMENT