Sharp AR-650 Service Handbook page 108

Mixer Shaft
Apply a coating of grease (Alvania No.2) to the
entire periphery of the mixer shaft before at-
taching the bearing.
*17 Transfer belt
Refer to section "3.6 Checking and Replacing the Transfer Belt".
*18 Transfer belt power supply roller
Refer to section "3.7 Checking and Replacing the Transfer Belt Power Supply Roller".
*19 Transport belt cleaning brush
Refer to section "3.8 Checking and Replacing the Transport Belt Cleaning Brush".
*20 Slit glass on the main unit
Remove the slit glass, and clean the front and
back sides.
*21 Transfer belt cleaning blade
Refer to section "3.3 Checking and Cleaning the Drum Blade, the Transfer Belt Cleaning Blade".
Mixer shaft
Surface to be cleaned (front/back side)
2 - 11
Bearing
1 Press in
2 Bring down
Slit grass
MAINTENANCE