Goodmans GMN10040MP3 Instruction Manual page 10

RECORDING
insert the tape with the open part of the cassette downward and the left hand spool fully wound
on the left.
Close the compartment door again, pushing it gently.
Recording stations
GMN10040MP3
on the main unit
Recording from a connected device
on the main unit
16
Select the TUNER function.
Select the band.
Tune to the required the station or
select a stored preset.
(see also page 10).
Start the recording.
Press to pause recording, press again
to resume.
Stop the recording.
Select the AUX function.
Make sure the audio output of the device
is properly connected (TV set, video
recorder or minidisc, etc.) to the AUX input
sockets on the back of the main unit (see
also page 9).
Start the recording.
Press to pause recording, press again
to resume.
Stop the recording.
Recording CDs with synchro start
The synchro start function is an easy way of copying (tracks of) CDs to a tape : One press of a button starts both CD playing and tape
recording at the right time.
Select the CD function.
on the main unit
Open the disc compartment to load a disc.
Press again to close the disc compartment.
Select the disc to be recorded.
Stop CD playback before the recording is started.
Start the recording.
Stop the recording.
Recording from another tape(dubbing)
Select the TAPE function.
on the main unit
Load a tape with enough free space into TAPE 2.
Load the prerecorded tape into TAPE 1.
Start your dubbing by selecting dubbing speed:
"Hi-DUB" : copy at double speed = half the time,
"DUB" : copy at normal tape speed.
Stop the recording.
If you want to start at the current position, press REC button.
Use only good quality tape cassettes.
- Keep cassettes away from excessive moisture or dust, magnetic and
electrical fields (loudspeakers and computer monitors, for example)
- Always wind the tape to the beginning when you have finished.
Store with the full spool at the bottom and with the cassette in its cover.
You can protect your precious recordings from being wiped by breaking
out the safety tab on the side of the cassette.
Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape.
R E C O R D I N G
17