On The Main Unit - Goodmans GMN10040MP3 Instruction Manual

Place your sound system
CONTROLS
horizontally on a flat, steady base and in a position so that air can circulate around it for
ventilation.
away from humidity and heat, magnetic fields, such as those from loudspeakers etc.,
and with no heavy objects placed on top.

On the main unit

GMN10040MP3
Remote control buttons
see page 4.
6
Turn system power ON(stand-by).
Press this button to turn the unit on from standby. Press this button
again to turn the unit back to standby.
UBS(Ultra Bass Sound)
Press this button to enhance the low frequency (Bass) sounds.
GEQ.
Press this button to add sound effects to the audio output.
DISPLAY / DEMO : to switch between the system's display and a
display demonstration.
To dub a tape at high or normal speed with synchronized start of
both, playing and recording tapes.
To dub a CD with synchronized start of disc and tape.
Direct function buttons
Press tape to select tape 1, press again to select tape 2.
Press tuner to select tuner, press again to change the band
between FM and MW.
Press AUX to listen to sound from external equipment connected to
the AUX input on the rear of the unit.
Press CD to listen to a CD that is already loaded into the CD disc
tray.
Select station presets and return MP3 normal display mode.
To start forward play tape/disc, to select station
presets and to enter selected track.
Tune in stations, to set values in when programming (i.e. when
setting the clock or creating a CD playback programme) to fast
reverse or advance tape and CD.
Headphone socket.
Insert a set of headphones and sound w ll be heard through the
headphones (the loudspeakers will automatically be muted).
Turn on/off the 3 stereo effect, see page 5.
Pause playback/recording of CD / Tape or to set/enter a value
when programming a CD or setting the clock/timer.
Open or close the disc compartment to load / unload CDs.
Select the next disc inserted into the CD tray.
Direct access to any discs already loaded into the CD tray.
Start tape recording.
Tune in stations, to set values in programming, to select tracks.
GMN10040MP3
Tape compartment 1 for playing tapes. Tape compartment 2 for playing and recording tapes.
C O N T R O L S
To set the volume level.
Stop playback and recording or clear
values and functions.
7