Programmed Playback; Intro Scan Playback - Goodmans GMN10040MP3 Instruction Manual

C D [ M P 3 ]
p l a y b a c k
folder skip (MP3 CD only)
GMN10040MP3
MP3 file search
During playback, discs damaged with dirt or a scratch may make a pop sound,
clipping sound or cut off.
Tracks or MP3 files with damaged or corrupted parts are skipped or forwarded to
next track or MP3 file.
Only supported file type will have the extension MP3 with MP3 encoding.
When searching by MP3 file or folder name, the folders and files are sorted in a
alphabetical order.
Total 255 MP3 files and 128 folders within a disc can be recognized.
The main unit can playback CD-R/RW made for ISO9660 file format and disc at once
method. For other file format or packet writing method, it will not playback the discs.
TIP : To shorten the reading time of MP3 discs....
Make a disc at a lower speed, single session disc closed CD-R for ISO9660.
12
When the MP3 disc is stopped, press
"FOLDER" button to display the current
folder name.
Press the TUNE UP/DOWN button
repeatedly to select the required folder.
Start playback.
When file name is displayed (press ID3
button repeatedly until *FILE* is shown
on the display), press SET button to
search by MP3 file name.
Use these buttons to select the first
character of the desired MP3 file. If the
system displays "[NONE]", there are no
files that start with that letter.
Press this button to confirm the selected
letter.
Use these buttons to select the required
file that starts with the selected letter. To
cancel search mode press the "CLEAR
button.
Start playback with the selected file.

Programmed playback

1. Stop the disc (programmes can only be created during stop mode).
2. Select the programme function.
3. Choose a disc.
4. Select a track number to be programmed.
5. Store this number in the programme.
Up to 30 tracks can be programmed by repeating step 3 to 5.
DISC CHANGE button has no effect in programming.
Play your programme.
Search and skip functions as normal during CD programm playback.
Stop Playback
To cancel the CD programme playback, press this button twice.

Intro scan playback

To playback the first 10 second of each track or MP3 file.
To cancel intro scan playback, press the INTRO again or PLAY button, and
then "INTRO" will no longer be shown in the display.
The system will not play an unfinalized CD-R disc.
Discs recorded by personal computer or high speed recording may not play (or cause noise) depending on recording
format. It is recommended to use and play discs recorded at as low speed as possible.
C D [ M P 3 ]
p l a y b a c k
13