Goodmans GMN10040MP3 Instruction Manual page 4

CONTROLS
Please note, the instructions guiden in this is refer mainly it the remote but the main functions
buttons are also available on the front of the main unit.
Press the POWER button or FUNCTION buttons (TAPE, TUNER, AUX, CD) to turn on the power.
The remote control
GMN10040MP3
Power on (stand-by).
Press repeatedly to select tape, tuner, AUX or CD player.
Display the current time.
Set the time for the unit to turn on also turn timer on / off.
Set the period after which the unit will turn off.
Select FM or MW radio.
Select FM mono for weak stereo reception (tuner mode) or switch
between tape decks 1 and 2.
Mute (on / off) the volume for a while, e.g. during a telephone call.
Set a programm for CD playback.
Select random playback.
Select repeat playback..
Start CD playback or select station presets.
Stop or cancel values and functions.
Tune in stations, set values in programming, fast reverse or advance
tape and CD.
For a short pause during recording of a tape or CD play or to advance in
a programming (e.g. clock set).
Set the volume level.
Add sound effects to the sound output.
Bass enhancement or 3ST (on / off), see page 5.
Press and hold to select 3ST sound mode.
Show the name of folder the currently playing track is in (MP3 CD only).
Select intro play for CD.
Display the ID3 tag information (MP3 CD playback only).
4
Direct access to each of the CDs loaded.
Sound control
On the
main unit
Volume control
Rotate the volume control or press the column buttons on the remote to
adjust the volume.
(MIN, VOL 1 ~ VOL 28, MAX).
3ST(3 Stereo)
This button adds the 3ST music effect to the sound output.
Ultra Bass Sound
Press this button on the remote control or main unit to enhance the low
frequency (Bass) sounds.
Mute
Press this button on the remote control to mute the sound.
GEQ
Press this button on the remote control to add sound effects to the audio
output.
Mono/Stereo
If there is to much noise (hiss) when listening to an FM station in stereo
press this button to change to mono reception which will reduce the amount
of noise heard. To return to stereo reception press this button again.
Demo/Display
Press this button on the main unit to switches between normal display mode
and a demonstration shown on display.
C O N T R O L S
On the
remote control
5