Max. thickness:
3mm
Some slide mounts are not recommended for use in the slide feeder. Jamming is
likely to occur with the following slide mounts.
Remount slides if the mount is damaged or coming apart.
RECOMMENDED SLIDE MOUNTS
The Slide Feeder can load
approximately 50 mounted slides
(1.6mm thickness). The number of slides
that can be loaded depends on the
thickness of the slide mounts. Slide
mounts should be between 1 – 3mm
thick and have a flat, even surface on
both the top and bottom.
Mounts with indentations on the surface,
such as for labels or slots where film is
to be inserted.
Mounts with rounded edges.
Mounts with rough, uneven edges or
surfaces.
10