Table of Contents
Advertisement
The indicator lamp on the front of the slide feeder displays the status of the slide
feeder and scanner. Its indications are different that those of the scanner's
indicator lamp.
Indicator Lamp
Glows
Blinks .5Hz
(1 time every 2 sec.)
Blinks 2Hz
(2 times every sec.)
Blinks 8Hz
(8 times every sec.)
INDICATOR LAMP
Scanner/Slide Feeder Status
The scanner and slide-feeder are on
and ready.
The scanner is:
• setting-up.
• scanning.
• focusing.
The film-slot door is open.
One of the following has occurred:
• The slide carrier is not inserted.
• A film holder is inserted instead of
the slide carrier.
• The fluorescent lamp unit cover is
not fully closed.
• The fluorescent lamp is burnt out.
• There is a hardware malfunction.
Contact a Minolta service facility.
27
Advertisement
Table of Contents
