Minolta SC-100 User Manual page 9

7. Tighten the holding
screws on both sides
of the slide feeder,
then tighten the
holding screw on the
top of the scanner.
• Tighten the holding
screws by pressing
and turning.
8. Press the power
switch on the front of
the slide feeder to
turn the scanner on.
• Set-up will begin.
• The indicator lamp on
the front of the slide
feeder will blink slowly
while the scanner is
setting up. Wait until
the indicator lamp on
the front of the slide
feeder glows.
9. Turn on the computer.
9