User Friendly Keyfobs; User Automation Outputs - Pyronix EURO 46 APP User Manual

User Friendly Keyfobs

The two-way wireless keyfob allows you to see the status of your EURO 46 APP Panel via three colour
LEDs:
System arm: A RED LED will illuminate.
System disarm: A GREEN LED will illuminate.
System fault: An AMBER LED will illuminate (this will flash when the keyfob is unable to set the
system).
It is possible to allocate different functions to each keyfob, such as: setting or unsetting
different areas, activating outputs to control external devices (such as: gates), requesting the
system status and activating HU (Hold-Up / Panic alarms).
Up to 32 wireless keyfobs can be added to your EURO 46 APP Panel. Each wireless keyfob has a unique ID, which can be
reported to the ARC and HomeControl+ App. These are stored in the event log of the EURO 46 APP Panel individually. The
keyfob also allows you to individually set or unset every area, giving you total control of your system.
NOTE: Keyfobs may only be used if the EURO-ZEM32-WE is installed. Ask your engineer for more information.

User Automation Outputs

The EURO 46 APP Panel gives you the option to operate up to 30 devices (such as: gates, lights, sprinklers.), via your keypad or
remotely via your keyfob or HomeControl+ App.
HomeControl+ App and SMS notifications
Your EURO 46 APP Panel will provide you with real-time push notifications on your phone or within the HomeControl+ App
(See HomeControl+ App Setup Guide), such as: that your child has returned home from school, or a leakage of water in your
property. You can also opt to receive these via SMS text messages (THIRD PARTY SIM CARDS ONLY).
4