Master Manager Menu Options - Pyronix EURO 46 APP User Manual

Master Manager menu options

Set Date & Time
Programs the date and time and enables the summer-time automatic adjustment.
Operate User Outputs
Activates/deactivates user automation outputs that are used to remotely activate devices, such as electronic gates & lights.
Omit Inputs
Disables any sensor (input) on the system for the current setting period. This feature also disables tamper alarms.
Change Codes
Programs the user codes, tags and learns keyfobs to the HomeControl+ panel.
Review Logs
The 'Review Logs' function is used to view all operational information of the alarm system, such as setting/unsetting
information, access control and alarm activations etc.
Set Up App Data
To use the HomeControl+ App (see App Setup Guide or contact your installer) this function must be enabled.
Wi-Fi Setup (future use)
Used to add or change a WiFi connection with your router (if you have the WiFi communications module installed).
SMS Phonebook
If SMS texting is enabled, there will be up to 4 mobile numbers that can be programmed to send SMS alarms. Please discuss
this feature with your installer if required (THIRD PARTY SIM CARDS ONLY).
Walk Test
The 'Walk Test' function allows the testing of all programmed inputs on the alarm system.
Siren Test
This function is used to test the external siren (wired and wireless) and strobe.
Allow Engineer Menu
If this function is enabled, the engineer will require authorisation from you before they can access the engineer menu.
Block Remote Set
Blocks any attempt at setting the system remotely via the upload/download software functionality.
Block UDL
Blocks any attempt at dialling into the system remotely via the upload/download software functionality.
System Sounds Demo
This function demonstrates all the sounds of the Enforcer.
Exit Manager Menu
Exits the Master Manager menu.
NOTE 1: Pressing the  key will exit the master manager menu at any main menu option above.
15