Emergency Procedures - GE pH/C-900 Operating Instructions Manual

2 Safety instructions
2.2 Labels
Label text
2.3

Emergency procedures

Introduction
This section describes how to perform an emergency shutdown of Monitor pH/C-900.
The section also describes the result in the event of power failure.
16
Description
Warning! Read the user documentation before using
the system. Do not open any covers or replace parts
unless specifically stated in the user documentation.
This symbol indicates that waste electrical and electron-
ic equipment must not be disposed as unsorted munic-
ipal waste and must be collected separately. Please
contact an authorized representative of the manufac-
turer for information concerning the decommissioning
of equipment.
This symbol indicates that the product contains haz-
ardous materials in excess of the limits established by
the Chinese standard SJ/T11363-2006 Requirements
for Concentration Limits for Certain Hazardous Sub-
stances in Electronics.
The system complies with applicable European direc-
tives.
The system complies with the requirements for
electromagnetic compliance (EMC) in Australia and New
Zealand.
This symbol indicates that Monitor pH/C-900 has been
certified by a Nationally Recognized Testing Laboratory
(NRTL). NRTL means an organization, which is recognized
by the US Occupational Safety and Health Administra-
tion (OSHA) as meeting the legal requirements of Title
29 of the Code of Federal Regulations (29 CFR), Part
1910.7.
Monitor pH/C-900 Operating Instructions 29-0549-25 AB