GE pH/C-900 Operating Instructions Manual page 37

Display
Set Cond Scale 100%
Set Cond Scale 0%
Calibrate pH
Set pH Analogue Out
Check
Setup
Alarm/Timer 00:30:52
Check monitor cell and electrode
A check of the conductivity cell and pH electrode can be performed.
Step
1
2
Monitor pH/C-900 Operating Instructions 29-0549-25 AB
Action
Select main menu Check, press OK.
Select sub menu Check Monitor cell and Electrode,
press OK.
Function
Setting conductivity full scale.
Setting conductivity zero point.
Calibration of pH monitor.
Setting the recorder output for the pH measurement.
Check internal operating values. See Check monitor cell
and electrode, on page 37.
Setup conductivity, pH, temp., language, etc. See Sec-
tion 5.3 Setup menu, on page 40.
Set different timer option. See Setting and using the alarm
timer, on page 39.
5 Operation
5.2 Menu selection and settings
Display
Check Monitor Cell and
Electrode
37