Chapter 5 CLI Commands
Show Commands
When 10 MHz is stabilized and the GPS is in Locked mode, the TimeProvider
100 output is in
When 10 MHz is stabilized and the GPS is in Unlocked mode, the TimeProvider
100 output is in
When 10 MHz is not stabilized during warm up RTE mode (regardless of the
GPS status), the TimeProvider 100 output is in DUS (Do not Use for Sync) mode,
and the SSM value = F.
Input:
tp100> show output
Response:
tp100>
show snmp
This command is used to display SNMP manager information.
Input
tp100> show snmp manager
Response:
----------------------------------------------
|Index
|---------|----------------------|--------------|
|0
----------------------------------------------
tp100>
68
TimeProvider 100 User's Guide
clock mode, and the SSM value = 2.
st1
clock mode, and the SSM value = 8.
st3
|Manager
|192.168.81.67
|Trap port |
|162
|
098-00106-000 Revision A – March, 2009