Table of Contents
Advertisement
Chapter 5 CLI Commands
Show Commands
show inventory
This command is used to display product manufacturing data.
Input:
tp100> show inventory
Response:
Part number
090-95000-01
tp100>
show ipconfig
This command is used to display the configuration parameters of the Ethernet ports.
Note that these parameters are what the operator set, not necessary the current
status of the parameters.
Input:
tp100> show ipconfig
Response:
-------------------------------------------------------------------------------
|Port#
|Mode
|State
|--------|--------|--------|----------------|----------------|----------------|
|MGMT
|static
|enable
|........|........|........|................|................|................|
|NTP
|static
|enable
-------------------------------------------------------------------------------
tp100>
show ipstatus
This command is used to display the current status of the Ethernet ports.
Input:
tp100> show ipstatus
64
TimeProvider 100 User's Guide
Serial
HW Ver
R03009
2
|IP Address
|192.169.1.10
|192.168.2.10
SW Ver
FPGA
0.0.14
0x17
|Gateway
|Netmask
|192.169.1.1
|255.255.0.0
|192.168.2.1
|255.255.255.0
098-00106-000 Revision A – March, 2009
Manufacture date
11/14/2008
|
|
|
Advertisement
Table of Contents
