12.
Configuration and Commissioning
12.1.
Buttons
MelcoREMOTE has six buttons on the front fascia, as the following image shows.
12.2.
Initial power on
Upon applying power the MelcoREMOTE will beep twice and the LCD backlight will illuminate.
After a few seconds the MelcoREMOTE firmware version will be briefly shown before the Status Screen.
MelcoREMOTE will immediately attempt to connect and synchronise with the server via GPRS or Ethernet.
12.3.
Screen navigation
The three navigation buttons located below the LCD are used mainly for navigation between screens. The text on the
bottom line of the LCD indicates the function of the button directly below it.
Page 27 of 52