Armrest Width Adjustment - Pride Celebrity XL Owner's Manual

V I I . C O M F O R T A D J U S T M E N T S

ARMREST WIDTH ADJUSTMENT

The armrest width of your Celebrity XL can be adjusted inward or outward.
1. Turn the armrest adjustment knobs at the back of the seat frame counterclockwise to loosen. See figure 13.
2. Slide the armrests in or out to the desired width.
3. Turn the armrest adjustment knobs clockwise to tighten.
NOTE: You can also lift up the armrests to allow getting on and off of your Scooter easier.
ARMREST HEIGHT ADJUSTMENT
You will need the following tools to adjust the height of the armrests:
n 5/32 inch hex key
n 1/8 inch hex key
n 7/16 inch wrench
1. Loosen the setscrew on the side of the height adjustment tube with the 1/8 inch hex key. See figure 14.
2. Loosen and remove the acorn nut and screw holding the height adjustment tube in place.
3. Raise or lower the height adjustment tube to the desired height.
4. Align the holes in the adjustment tube with the holes in the armrest upright.
5. Insert the screw through the holes in both the height adjustment tube and the armrest upright.
6. Install and tighten the acorn nut.
7. Tighten the setscrew on the side of the height adjustment tube.
8. Repeat for the other armrest.
HEIGHT ADJUSTMENT TUBE
SETSCREW
ACORN NUT
ARMREST UPRIGHT
Figure 14. Armrest Height Adjustment
Celebrity XL 25