V I I I . D I S A S S E M B L Y A N D A S S E M B L Y - Pride Celebrity XL Owner's Manual

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y

No tools are required to disassemble or assemble your Celebrity XL. Always disassemble or assemble your
Scooter on a level, dry surface with sufficient room for you to work and move around your Scooter. Keep in
mind that the disassembled sections of your Scooter take up more floor space than the assembled unit.
DISASSEMBLY
You can disassemble the Celebrity XL into six or seven pieces: the seat, the front frame, the rear frame, the
rear shroud, and the two batteries; you can also remove the utility tray from the rear frame, if necessary.
Place your Scooter in an area where you have sufficient clearance to move the parts around. You need
approximately 1,5 meters in all directions. You may need assistance to lift some of the Scooter components.
See III. “Specifications” for individual component weights.
1. Place the freewheel lever in the drive (down) position.
2. Push and hold down the seat lock lever to unlock it; then rotate the seat a quarter turn and lift the seat up and
off of your Scooter. See figure 15.
3. Gently lift the rear shroud off of your Scooter. See figure 16. If your Scooter is equipped with the full lighting
package, you will not be able to fully remove the rear shroud until you perform step 4.
Figure 15. Seat Removal
26
Figure 16. Shroud Removal
Celebrity XL