Comfort Adjustments; Tiller Angle Adjustment; Armrest Width Adjustment - Pride Revo Owner's Manual

V I I .

TILLER ANGLE ADJUSTMENT

WARNING! Remove the key from the
key switch before adjusting the tiller
or the seat. Never attempt to adjust
the tiller or the seat while the scooter
is in motion.
Your scooter is equipped with a pivoting tiller that allows
adjustment to several positions from the scooter deck to
the farthest forward stop. See figure 10.
1. Turn the tiller angle adjustment knob anticlockwise to
loosen the tiller.
2. Move the tiller to a comfortable position.
3. Turn the tiller angle adjustment knob clockwise to
secure the tiller in position.
NOTE: In order to lower the tiller to
the scooter deck, you must first
remove the seat and both battery
packs. See VIII. “Disassembly and
Assembly.”
SEAT ROTATION
The seat lock lever locks the seat in one of four posi-
tions.
1. Pull up on the seat lock lever to unlock the seat. See
figure 11.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely
in place.

ARMREST WIDTH ADJUSTMENT

The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs at the back of
the seat frame. See figure 11.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
The armrests can also pivot upward to aid in getting onto
and off of your scooter.
Revo/Rev A/December 2003
C O M F O R T A D J U S T M E N T S
Figure 10. Tiller Angle Adjustment Knob
BOLTS
Figure 11. Seat Adjustments
www.pridemobility.com
TILLER ANGLE
ADJUSTMENT
KNOB
ARMREST ADJUSTMENT KNOBS
SEAT LOCK LEVER
29