Armrest Angle Adjustment; Seat Height Adjustment; Changing The Seat Height; Vi. Comfort Adjustments - Pride HURRICANE Owner's Manual

V I . C O M F O R T A D J U S T M E N T S

ARMREST ANGLE ADJUSTMENT

The armrest angle of your PMV can be adjusted
upward or downward by turning the adjustment
dial. See figure 12B.
NOTE: Pivot the armrests upward to make getting
onto and off of your PMV easier.

SEAT HEIGHT ADJUSTMENT

You can change the seat height to one of three posi-
tions in 1-in. (2.54-cm) increments. See figure 13.

Changing the seat height:

1. Remove the seat and shroud from your PMV.
See VII. "Disassembly and Assembly."
2. Loosen the seat height adjustment nut and
remove it from the bolt, then remove the bolt.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
align the locating holes of the upper seat post
with those of the lower seat post.
6. Insert the seat height adjustment bolt through
the locating holes of both the upper and lower
seat posts. Reinstall the nut and tighten.
7. Tighten the clamp-action bolt
8. Reinstall the rear shroud and the seat.
Hurricane
Figure 12B. Armrest Angle Adjustment
SEAT HEIGHT
ADJUSTMENT
NUT
NUT
Figure 13. Seat Height Adjustment
www.pridemobility.com
ADJUSTMENT DIAL
UPPER SEAT
POST
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
CLAMP-ACTION
BOLT
LOWER SEAT POST
29