Care And Maintenance; Tyre Pressure - Pride Celebrity XL Owner's Manual

X . C A R E
Your Celebrity XL requires a minimal amount of care and maintenance. If you do not feel confident in your
ability to perform the maintenance listed below, you may schedule inspection and maintenance at your
authorized Pride provider.
The following areas require periodic inspection and/or care and maintenance.

TYRE PRESSURE:

n We recommend you maintain the tyre pressure at 30 psi for optimum Scooter performance.
WARNING! Do not exceed 30 psi in your Scooter tyres; overinflating a tyre can cause it to explode.
TYRE CONDITION AND TREAD WEAR:
n Regularly inspect your Scooter’s tyres for signs of wear.
n Use a rubber conditioner on the tyres to preserve them.
WARNING! Do not put rubber conditioner on the tread area of tyres; the tyres may become
dangerously slippery.
EXTERIOR SURFACES:
n Bumpers and trim benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on a vinyl seat; it may become dangerously
slippery.
BATTERY TERMINAL CONNECTIONS:
n Ensure the terminal connections remain tight and uncorroded.
n Ensure the batteries sit flat in the battery wells.
n Ensure the battery terminals face the rear of your Scooter.
WIRING HARNESSES:
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n Have any damaged connector, connection, or insulation repaired or replaced by an authorized Pride service
technician before you use your Scooter.
ABS PLASTIC SHROUDS:
n Apply a light coat of car wax to the shrouds to help retain their high gloss; the shrouds are formed from durable
ABS plastic and are coated with an advanced formula urethane paint.
Celebrity XL
A N D M A I N T E N A N C E
31