Stromer ST2 Operating Manual page 30

Schedule and inspection work
Ask your Stromer dealer for suitable lubri-
cants! Not all lubricants are designed for all pur-
poses. Using the wrong lubricants can lead to
damage and impact the part's performance!
Work to be undertaken
Check the following:
• Tires and wheels
Torques:
• Handlebars
• Cranks
Make any adjustments to the following compo-
nents:
• Headset
• Brakes
• Pedals
• All mounting screws
• Seat post
• Seat
• Gear system
• Suspension elements
30 31
Before each use of the S-pedelec
Work to be undertaken
Maintenance / Inspection:
Check the following:
• Spokes
• Rims for wear and concentricity
• Tires for damage and foreign bodies
• Quick release axles
• The functionality of the gear system
• The functionality of the brakes
• Hydraulic brakes: Tightness
• Lighting
• Bell or hooter
• Tubed tire and tubeless Tires: Safe seat and
correct air pressure
Every 300 to 500 kilometers
Work to be undertaken
Check the following:
• Drive chain
• Check the brake pads for wear, replace them
if required
Clean:
• Drive chain
Grease:
• The chain with suitable lubricant
Check the following:
• All screw joints are secure
Every 3000 kilometers
Work to be undertaken
To be checked, cleaned,
and possibly replaced by the Stromer dealer:
• Hubs
• Pedals
• Brakes
• Headset
• Gear system
After rides in the rain
Work to be undertaken
• Remove humidity, dry
Cleaning and greasing:
• Gears
• Chain
The first inspection is particularly important
for ensuring that your S-pedelec remains safe and
problem-free! Cables and spokes stretch, while bolt-
ed connections can loosen. Therefore always allow
a Stromer dealer to carry out the first inspection.