Content ST2 components Deactivate lock Parts Scope of delivery Set PIN Replacement of add-on parts on the ST2 User interface Puncture and removal of wheelset L1e e-bike Battery Warning notes ST2 battery Riding Battery removal Transport Before riding for the first time...
BMC Operating manual before riding for the The power button has the following functions: If you do not switch off your ST2, it switches to Practice the operation of and riding with your ST2 L1e e-bike first time.
Using the controller on the handlebar, you can As soon as you press the brake, the motor assis- As soon as you take off with the ST2, the touch- To switch the headlight on and off, press the light press the control buttons + and – to change be- tance is interrupted.
Always remove the key from the lock and retain Slide the battery down until this engages. tion. You can lock the ST2 with a PIN when it is 3. In the PIN rubric you can set a new PIN. it in a safe place so that it does not break and is switched off.
1 on a climb. motor must perform higher when accelerating • If the ST2 814 Wh battery is not used for an battery or battery charger displays any cracks or on a climb. Minimize your luggage in order to extended period, store it at room temperature or fractures.
• Charge your battery at room temperature. stationary. As soon as you take off, the touch- es the response behaviour of the ST2 in all assis- desired display format as well as set the time determined that must not be changed. This means •...
You thereby avoid the risk of an In order to install the wheel again, proceed in the If you would like to transport or ship the ST2 by electric shock and of injury. reverse order of the removal. The torque of the airplane, please contact the transport company thru axles is 20 Nm.