Contents: - Operating instructions Stromer S-Pedelec - Battery charger The S-Pedelec bought by you may look different. These instructions describe S-Pedelecs. These operating instructions are part of the S-Pedelec delivery scope and only apply for the models ST3 and ST5.
DEAR CUSTOMER, We would like to start by congratulating you on All information in these operating instructions your new Stromer and provide you with some im- relate to structure, technology, care and mainte- Know your country’s road traffic regulations portant information regarding your new premium nance.
If you don’t have a torque wrench, bring your bike to a Stromer shop for re- pair! Parts that have been installed incorrectly may fall off or break! This may result in severe...
CONTENTS Components for the Stromer S-Pedelec 2 Appropriate use Service / Maintenance Screws and torque spanners Dear customer, Replacing parts on your speed pedelec 15 Chain / Drive Rims / Tires Safety information Riding a Stromer Dealing with punctures Power button...
Detailed supplementary information regard- Only charge the Stromer battery with a ing the functions and settings are provid- Stromer charger. ed by the Stromer app or on the Internet at www.stromerbike.com/support Inserting the battery 1) Completely charge the battery before the first ride, internally or externally.
Page 7
Minus trolled starting up in road traffic or on loose ground can lead to a fall or severe injuries. Prac- tice operating and riding your Stromer in a quiet Basic settings Driving mode Touchscreen display and safe place before you take to public roads!
“Appropriate use” section. situation in the respective country before use. are completely able to control it. You must al- Ask your Stromer dealer if you are not sure about The operating instructions assume that you can ways be fully fit to ride.
No device as a power source for the front and rear motor power is transmitted when one of the brake lights to work. The lighting system of the Stromer ERS AND LOAD TRAILERS levers is activated! is powered by the battery or, when this has been drained, by a motor with dynamo function.
Stromer Trailer Plate Kit (Art. 221019). child trailers in combination with S-Pedelecs is d. VrV) Get advice from a Stromer dealer on the operation prohibited in many countries. It is permitted to transport a child on a trailing of the trailer.
(see page 12). If you should find any cuts, rips or holes, please • Allow your Stromer dealer to set up the brakes so refrain from riding! First have your S-Pedelec that the brake levers are always within easy reach.
Page 12
Consider that not every stem is suitable for If your S-Pedelec was supplied without the pedals Before you use your Stromer S-Pedelec for the first every steer tube when retrofitting your S-Pedelec! pre-installed, these have to be attached with the time, the seating position has to be set up to suit Only use Stromer stems.
Do not ride off when you are not completely sure that your S-Pedelec is in flawless condition. BEFORE EACH RIDE Have it inspected by a Stromer dealer. When adjusting the height of the seat, nev- It is particularly important if you use your...
29) S-Pedelec. They extend the braking distance, among This information can be found at your Stromer re- • Only use add-on parts that comply with the other things. This may lead to severe accidents or...
+ weight of trailer (if trailer is Manufacturers and dealers are not liable for dam- permitted). Stromer ST5 and ST3 Weight: 29.2 kg. ages resulting from use outside of intended use. This applies particularly to damages resulting...
Bicycle mode: The motor is switched off. Sleep mode Support mode 1: Low motor support, optimized When the Stromer is not switched off, it will for large driving range. switch to sleep mode after approx. 5 minutes of Support mode 2: Medium motor support – this inactivity.
Touchscreen example, when driving downhill. In this case the motor acts like a dynamo, i.e. it performs a brak- The display of the Stromer is equipped with a re- ing function and thus generates the power that sistive touch screen.
Stromer OMNI App charge also decreases. Get the maximum out of your Stromer. Install the • Road quality and the route profile: Rough pave- Stromer app on your smartphone and discover the ment or gravel reduce the range.
You can adjust the strength of the motor braking response behavior of the Stromer at all support of the Stromer to your driving style with the brak- levels. Higher sensitivity reduces the driving Languages ing strength.
S-Pedelec, e.g. mainte- use or wrong handling may cause injury or a deep discharging. nance or assembly. Unintentionally activating the fire. Stromer is not liable for damage caused by On/Off switch might lead to injury or an electric inappropriate use. shock.
Read the operating instructions for the char- ger before beginning to charge the battery. You can change the battery of your Stromer while it is installed in your S-Pedelec. However, you can also remove the battery from the S-Pedelec...
Only use the charger supplied or a charger re- Charging the battery externally, outside tion the plug correctly. leased by Stromer to avoid the risk of fire. the S-Pedelec 3. Connect the Stromer charger with the Stromer. Use the charger in a dry room and don’t cover it up First connect the charger to the mains pug (LEDs The LEDs light up in orange and green.
The driving display provides the option of track- In this case, using non-original or non-approved ing the battery charge status of your Stromer. The parts also invalidates the registration of the battery charge status is shown in the form of a bar S-Pedelec.
If you don’t own a torque wrench then you Many modern chains for derailleur gear systems should always leave this work to a Stromer dealer! The drive chain must be regularly cleaned and no longer have chain connectors. Special tools...
Safety instructions for hydraulic disk For Stromer tyres in sizes e 57– 584 a pres- Brakes are vital to your safety on the bike. brakes sure of 2.2 bar/32 psi is recommended. You should therefore maintain them on a regular basis.
S-Pedelec and switch • Tampering with the bike’s technology may • Clean your S-Pedelec after every ride and check gears before your first ride. Allow your Stromer limit its capabilities, cause defects or break the it for possible damage.
Page 27
• Drive chain ed connections can loosen. Therefore always allow • Headset Grease: a Stromer dealer to carry out the first inspection. • Brakes • The chain with suitable lubricant • Pedals Check the following: • All mounting screws •...
Lubrication Working on the S-Pedelec requires special knowledge, experience and special tools! Only allow Stromer deal- ers to work or check key parts of the bicycle! Lubrication schedule What must be lubricated? At what intervals? With which lubricants? Chain after removing dirt, after riding in the rain, every 250 km...
Screw connections It is vital that all bolted connections on the Component Torque S-Pedelec have the correct torque in order to en- Grip clamp (Ergon GS1-L) – handlebar stem unit/handlebar 5 Nm sure that they are secure. Too much torque can damage the screw, nut or component.
WARRANTY, DEFECTS, WEAR TECHNICAL DATA You were given the warranty and limitation of li- Permitted total weight of Stromer S-Pedelec: 150 kg ability separately at the time of purchase of your Vehicle including battery + driver + luggage + trailer S-pedelec.
Page 32
BQ983 BQ983 LI-ION BATTERIES BQ814 Model ST1306AC Model ST983 VOLTAGE [V] 47,06 CAPACITY [AH 15,9 19,8 20,4 ENERGY [WH] CHARGING TIME WITH CHARGER CR190 [H:MIN] 5:30 6:30 6:30 CHARGING TIME WITH CHARGER CR254 [H:MIN] 4:45 5:30 5:30 CHARGING TIME WITH CR65 CHARGER [H:MIN] 15:00 18:00 18:00...