Stromer ST2 Operating Manual page 19

Pressing the power button again brings you back
to the driving mode display.
Time
You can individually set the time and the display
format.
1. Go to MENU and SETTINGS.
2. The TIME section can be used to select the de-
sired display format and to set the time.
Languages
The Stromer supports the following languages:
German, English, French, Italian and Dutch.
1. Go to MENU and press SYSTEM.
2. Select the language required in the LAN-
GUAGE section.
Units (km/miles)
The Stromer supports metric (km; km/h; Wh/km)
and imperial (Mi; mph; Wh/Mi) measuring units.
1. Got to MENU and press SYSTEM.
2. The UNITS section can be used to select the
preferred measuring units.
Detailed information regarding the individual
settings is provided in the respective sub-chapters
or online at www.stromerbike.com.
The function of the settings described may
change after a software update. A description of
the current functions is provided online at www.
stromerbike.com.
The menu us only available when the
Stromer stands still. As soon as you start moving,
the touch screen changes to the riding display.
You cannot call up the menu during the ride for
your own safety.
Break mode
You can adjust the strength of the motor braking
of the Stromer to your driving style with the brak-
ing strength.
1. Go to MENU and press BIKE.
2. The strength of the brake mode can be set in
the BRAKEMODE section.
Setting the PIN
1. Press the Power button to get to the shortcut
display.
2. Select MENU in the shortcut display and then
press SETTINGS.
3. The PIN column can be used to set a new PIN.
Your first locking code is randomly generated
and will be sent to you by SMS to the registered
mobile number and by e-mail to the registered e-
mail address when your Stromer is activated.
If your Stromer was locked with a PIN, you
must unlock your Stromer after switching it on be-
fore you can use it (see "Theft protection" above).
Torque sensor
You can adapt the response characteristics of your
Stromer to your riding style. The ratio between
rider power and motor support is controlled by the
sensor sensitivity.
1. Go to MENU and press BIKE.
2. You can set the sensitivity of the sensor in col-
umn TORQ. SENS.
Higher sensitivity implies that your Stromer will
respond more to low pressure on the pedals.
A change of sensor sensitivity influences the
response behavior of the Stromer at all support
levels. Higher sensitivity reduces the driving
range.