Chrysler Journey Owner's Manual page 383

JOBNAME: cims CHRY OM French PAGE: 383 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 2AF475AF
/chry_pdm/chrysler/owners/jcd/og
6. Install the bulb and connector assem-
bly into the housing and rotate the con-
nector ⁄
1
4
7. Reinstall the taillamp housing and fas-
teners.
License Plate Lamp
1. Push the small locking tab sticking out
of the end of the lens toward the side of
the vehicle and hold it in that position.
FLUID CAPACITIES
turn clockwise to lock it in place.
art=073302601.tif NO TRANS
License Lamp
2. Insert a small flat-blade tool between
the end of the lens with the locking tab and
the surrounding housing and then pivot
the tool to separate the lens from the
housing.
3. Hold the lens with one hand and rotate
the bulb's electrical connector
MAINTAINING YOUR VEHICLE
counterclockwise with the other hand and
then separate the bulb and connector
assembly from the lens.
4. Remove the bulb from the connector
socket and install the replacement bulb.
5. Install the bulb and connector assem-
bly into the lens and rotate the connector
⁄ turn clockwise to lock it in place.
1
4
6. Insert the end of the lens without the
locking tab into the housing on the liftgate
and then push the opposite end of the lens
into the housing, making sure it locks in
the housing.
1 ⁄ turn
4
383