Chrysler Journey Owner's Manual page 246

JOBNAME: cims CHRY OM French PAGE: 246 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 320D0F40
/chry_pdm/chrysler/owners/jcd/og
UNDERSTANDING YOUR INSTRUMENT PANEL
• Rotate the Rear Blower, Rear Tempera-
ture and the Rear Mode Control knobs
to suit your comfort needs.
• ATC is selected by adjusting the rear
blower
AUTO.
Once the desired temperature is dis-
played, the ATC System will automatically
achieve and maintain that comfort level.
When the system is set up for your comfort
level, it is not necessary to change the
settings. You will experience the greatest
efficiency by simply allowing the system to
function automatically.
NOTE: It is not necessary to move the
temperature settings for cold or hot ve-
hicles. The system automatically adjusts
the temperature, mode and fan speed to
provide comfort as quickly as possible.
246
knob counterclockwise to
Rear Blower Control
The rear blower control knob can be
manually set to off, or any fixed blower
speed, by rotating the knob from low to
high. This allows the rear seat occupants
to control the volume of air circulated in
the rear of the vehicle.
CAUTION!
Interior air enters the Rear Automatic
Temperature Control System through
an intake grille, located in the right
side trim panel behind the third row
seats. The rear outlets are located in
the right side trim panel of the 3rd
Row seat. Do not block or place ob-
jects directly in front of the inlet grille
or heater outlets. The electrical sys-
tem could overload causing damage
to the blower motor.
Rear Temperature Control
To change the temperature in the rear of
the vehicle, rotate the temperature knob