Chrysler Journey Owner's Manual page 172

JOBNAME: cims CHRY OM French PAGE: 172 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 3B9ABD89
/chry_pdm/chrysler/owners/jcd/og
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To do this, press and hold the two outside
buttons for 20 seconds until the red indi-
cator flashes. Note that all channels will be
erased. Individual channels cannot be
erased.
The HomeLink Universal Transceiver is
disabled when the Vehicle Security Alarm
is active.
Troubleshooting Tips
If you are having trouble programming
HomeLink , here are some of the most
common solutions:
• Replace the battery in the original trans-
mitter.
• Press the LEARN button on the Garage
Door Opener to complete the training
for a Rolling Code.
172
• Did you unplug the device for training,
and remember to plug it back in?
If you have any problems, or require as-
sistance, please call toll-free 1–800–355–
3515 or, on the Internet
www.HomeLink.com for information or as-
sistance.
General Information
This device complies with FCC rules Part
15 and Industry Canada RSS-210. Opera-
tion is subject to the following two condi-
tions:
1. This device may not cause harmful
interference.
2. This device must accept any interfer-
ence that may be received including inter-
ference that may cause undesired opera-
tion.
NOTE: The transmitter has been tested
and it complies with FCC and IC rules.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
at
to operate the device.
The term IC before the certification/
registration number only signifies that In-
dustry Canada technical specifications
were met.
POWER SUNROOF — IF
EQUIPPED
The power sunroof switch is located be-
tween the sun visors on the overhead
console.