Chrysler Journey Owner's Manual page 216

JOBNAME: cims CHRY OM French PAGE: 216 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 338EAA09
/chry_pdm/chrysler/owners/jcd/og
UNDERSTANDING YOUR INSTRUMENT PANEL
Sound Only or Sounds and Display button
followed by pressing the arrow back soft-
key. Refer to "Rear Park Assist System" in
"Understanding The Features Of Your Ve-
hicle" for system function and operating
information.
• Tilt Mirrors in Reverse
Press the Tilt Mirrors in Reverse soft-key to
change this display. When this feature is
selected, the outside rearview mirrors will
tilt downward when the ignition is in the
RUN position and the transmission shift
lever is in the REVERSE position. The
mirrors will move back to their previous
position when the transmission is shifted
out of REVERSE. To make your selection,
press the Tilt Mirrors in Reverse soft-key,
select On or Off followed by pressing the
arrow back soft-key.
216
• Blind Spot Alert
Press the Blind Spot Alert soft-key to
change this display. When this feature is
selected the Blind Spot Alert feature can
be set to Off, Lights or Lights and Chime.
The Blind Spot Alert feature can be acti-
vated in "Lights" mode, when this mode is
selected the Blind Spot Monitor (BSM)
system is activated and will only show a
visual alert in the outside mirrors. When
"Lights & Chime" mode is activated the
Blind Spot Monitor (BSM) will show a
visual alert in the outside mirrors as well as
an audible alert when the turn signal is on.
When "Off" is selected the Blind Spot
Monitor (BSM) system is deactivated. To
change the Blind Spot Alert status press
the Off, Lights or Lights & Chime soft-key
followed by pressing the arrow back soft-
key.
NOTE: If your vehicle has experienced
any damage in the area where the sensor
is located, even if the fascia is not dam-
aged, the sensor may have become mis-
aligned. Take your vehicle to an autho-
rized dealer to verify sensor alignment.
Having a sensor that is misaligned will
result in the BSM not operating to specifi-
cation.
• Rain Sensing
Press the Rain Sensing soft-key to change
this display. When this feature is selected,
the system will automatically activate the
windshield wipers if it senses moisture on
the windshield. To make your selection,
press the Rain Sensing soft-key, select On
or Off followed by pressing the arrow back
soft-key.