Tire Loading And Tire Pressure - Chrysler Journey Owner's Manual

JOBNAME: cims CHRY OM French PAGE: 282 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 34E4ECEF
/chry_pdm/chrysler/owners/jcd/og
STARTING AND OPERATING

Tire Loading And Tire Pressure

Tire Placard Location
NOTE: The proper cold tire inflation pres-
sure is listed on the driver's side B-Pillar.
Tire and Loading Information Placard
art=054907701.tif
Tire and Loading Information Placard
This placard tells you important infor-
mation about the:
282
1) number of people that can be car-
ried in the vehicle
2) total weight your vehicle can carry
3) tire size designed for your vehicle
4) cold tire inflation pressures for the
front, rear, and spare tires.
NO TRANS
Loading
The vehicle maximum load on the tire must
not exceed the load carrying capacity of
the tire on your vehicle. You will not ex-
ceed the tire's load carrying capacity if
you adhere to the loading conditions, tire
size, and cold tire inflation pressures
specified on the Tire and Loading Infor-
mation placard and in the "Vehicle Load-
ing" section of this manual.
NOTE: Under a maximum loaded vehicle
condition, gross axle weight ratings
(GAWRs) for the front and rear axles must
not be exceeded. For further information
on GAWRs, vehicle loading, and trailer
towing, refer to "Vehicle Loading" in this
section.
To determine the maximum loading condi-
tions of your vehicle, locate the statement
"The combined weight of occupants and
cargo should never exceed XXX kg or XXX
lbs." on the Tire and Loading Information
placard. The combined weight of occu-
pants, cargo/luggage and trailer tongue
weight (if applicable) should never ex-
ceed the weight referenced here.
Steps For Determining Correct Load
Limit
1. Locate the statement "The combined
weight of occupants and cargo should
never exceed XXX kg or XXX lbs" on your
vehicle's placard.