Jacking Instructions - Chrysler Journey Owner's Manual

JOBNAME: cims CHRY OM French PAGE: 331 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 30254BBF
/chry_pdm/chrysler/owners/jcd/og
The winch mechanism is designed
for use with the jack-handle only. Use
of an air wrench or other power tools
is not recommended and it can dam-
age the winch.
3. Place the spare tire near to the winch
cable. Hold the spare upright so that the
tire's tread is on the ground and the valve
stem is at the top of the wheel facing away
from the rear of the vehicle.
4. Tilt the retainer at the end of the winch
cable and drop it through the center of the
wheel. Then place the spare tire with the
cable and retainer underneath the vehicle.
art=060602590.tif
CAUTION!
5. Fit the assembled jack-handle over the
winch drive nut. Rotate the jack-handle
assembly clockwise to raise the spare tire
into the storage area. Continue to rotate
the jack-handle assembly until you hear
the winch mechanism click three times. It
cannot be over tightened. Push against
the tire several times to be sure it is held
securely in place.
NO TRANS
Spare Tire Retainer
WHAT TO DO IN EMERGENCIES

Jacking Instructions

WARNING!
Carefully follow these tire changing
warnings to help prevent personal
injury or damage to your vehicle:
• Always park on a firm, level sur-
face as far from the edge of the
roadway as possible before rais-
ing the vehicle.
• Turn on the Hazard Warning
flasher.
• Block the wheel diagonally oppo-
site the wheel to be raised.
• Set the parking brake firmly and
set an automatic transmission in
PARK.
331