Chrysler Journey Owner's Manual page 217

JOBNAME: cims CHRY OM French PAGE: 217 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 320FADAE
/chry_pdm/chrysler/owners/jcd/og
• Hill Start Assist
Press the Hill Start Assist soft-key to
change this display. When this feature is
selected, the Hill Start Assist (HSA) sys-
tem is active. Refer to "Electronic Brake
Control System" in "Starting And Operat-
ing" for system function and operating
information. To make your selection, press
the Hill Start Assist soft-key, select On or
Off followed by pressing the arrow back
soft-key.
Lights
• Headlight Off Delay
Press the Headlight Off Delay soft-key to
change this display. When this feature is
selected, the driver can choose to have
the headlights remain on for 0, 30, 60, or
90 seconds when exiting the vehicle. To
change the Headlight Off Delay status
press the 0, 30, 60 or 90 soft-key followed
by pressing the arrow back soft-key.
• Illuminated Approach
Press the Illuminated Approach soft-key to
change this display. When this feature is
selected, the headlights will activate and
remain on for 0, 30, 60, or 90 seconds
when the doors are unlocked with the RKE
transmitter. To change the Illuminated Ap-
proach status press the 0, 30, 60 or 90
soft-key followed by pressing the arrow
back soft-key.
• Headlights with Wipers
Press the Headlights with Wipers soft-key
to change this display. When this feature is
selected, and the headlight switch is in the
AUTO position, the headlights will turn on
approximately 10 seconds after the wipers
are turned on. The headlights will also turn
off when the wipers are turned off if they
UNDERSTANDING YOUR INSTRUMENT PANEL
were turned on by this feature. To make
your selection, press the Headlights with
Wipers soft-key, select On or Off followed
by pressing the arrow back soft-key.
• Auto High Beams
Press the Auto High Beams soft-key to
change this display. When this feature is
selected, the high beam headlights will
deactivate automatically under certain
conditions. To make your selection, press
the Auto High Beams soft-key, select ON
or OFF followed by pressing the arrow
back soft-key. Refer
SmartBeam™ — If Equipped" in "Under-
standing The Features Of Your Vehicle" for
further information.
• Daytime Running Lights
Press the Daytime Running Lights soft-key
to change this display. When this feature is
to "Lights/
217