Chrysler Journey Owner's Manual page 215

JOBNAME: cims CHRY OM French PAGE: 215 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 33564669
/chry_pdm/chrysler/owners/jcd/og
Clock
• Set Time
Press the Set Time soft-key to change this
display. When in this display you may
select the time display settings. To make
your selection, press the Set Time soft-
key, adjust the hours and minutes using
the up and down soft-keys, select AM or
PM, select 12 hr or 24 hr followed by
pressing the arrow back soft-key when all
selections are complete.
• Show Time Status
Press the Show Time Status soft-key to
change this display. When in this display
you may turn on or shut off the digital clock
in the status bar. To change the Show Time
Status setting press and release the On or
Off soft-key followed by pressing the ar-
row back soft-key.
• Sync Time
Press the Sync Time soft-key to change
this display. When in this display you may
automatically have the radio set the time.
To change the Sync Time setting press
and release the On or Off soft-key followed
by pressing the arrow back soft-key.
Safety / Assistance
• Front Collision Warning
Press the Front Collision Warning soft-key
to change this display. The Front Collision
Warning (FCW) feature can be can be set
to Far, set to Near or turned Off. The
default status of FCW is the Far setting.
This means the system will warn you of a
possible collision with the vehicle in front
of you when you are farther away. This
gives you the most reaction time. To
change the setting for more dynamic driv-
ing select the Near setting. This warns you
UNDERSTANDING YOUR INSTRUMENT PANEL
of a possible collision with the vehicle in
front of you when you are much closer.
This allows for a more dynamic driving
experience. To change FCW status press
and release the Off, Near or Far button
followed by pressing the arrow back soft-
key.
For further information, refer to "Adaptive
Cruise Control (ACC)" in "Understanding
The Features Of Your Vehicle".
• Park Assist
Press the Park Assist soft-key to change
this display. The Rear Park Assist system
will scan for objects behind the vehicle
when the transmission shift lever is in
REVERSE and the vehicle speed is less
than 11 mph (18 km/h). The system can be
enabled with Sound Only, Sound and Dis-
play, or turned OFF. To change the Park
Assist status press and release the Off,
215