Chrysler Journey Owner's Manual page 232

JOBNAME: cims CHRY OM French PAGE: 232 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 2E785276
/chry_pdm/chrysler/owners/jcd/og
UNDERSTANDING YOUR INSTRUMENT PANEL
vehicle door will cancel this feature. To
change the Engine Off Power Delay status
press the 0 seconds, 45 seconds, 5 min-
utes or 10 minutes soft-key followed by
pressing the arrow back soft-key.
• Headlight Off Delay
When this feature is selected, the driver
can choose to have the headlights remain
on for 0, 30, 60, or 90 seconds when
exiting the vehicle. To change the Head-
light Off Delay status press the + or -
soft-key to select your desired time inter-
val. Press the back arrow soft-key to return
to the previous menu.
Compass Settings
After pressing the Compass Settings soft-
key the following settings will be available.
232
• Variance
Compass Variance is the difference be-
tween Magnetic North and Geographic
North. To compensate for the differences
the variance should be set for the zone
where the vehicle is driven, per the zone
map. Once properly set, the compass will
automatically compensate for the differ-
ences, and provide the most accurate
compass heading. For the most accurate
compass performance, the compass must
be set using the following steps.
NOTE: Keep magnetic materials away
from the top of the instrument panel, such
as iPod's, Mobile Phones, Laptops and
Radar Detectors. This is where the com-
pass module is located, and it can cause
interference with the compass sensor, and
it may give false readings.
art=040506040.tif NO TRANS
Compass Variance Map
• Perform Compass Calibration
Press the Calibration key to change this
setting. This compass is self-calibrating,
which eliminates the need to manually
reset the compass. When the vehicle is
new, the compass may appear erratic and
the EVIC will display CAL until the com-
pass is calibrated. You may also calibrate
the compass by pressing the ON soft-key
and completing one or more 360–degree