Falcon G9081 User, Installation And Servicing Instructions page 4

These instructions are only valid if the country code appears on the appliance.
If the code does not appear on the appliance, refer to the technical instructions
for adapting the appliance to the conditions for use in that country.
Installation must meet national or local regulations. Attention must be paid to:
gas safety (installation & use) regulations, health and safety at work act, local
and national building regulations, fire precautions act.
To prevent shocks, all appliances must be earthed.
This equipment is for professional use only and must be used by qualified
persons.
The installer must instruct the responsible person(s) of the correct operation
and maintenance of the appliance.
Only competent persons are allowed to service or convert the appliance to
another gas type.
Gas appliances must have a stop cock fitted in the supply pipe work. The user
must be familiar with the location and operation of this device in order to turn
off the supply of gas in the event of an emergency.
Unless otherwise stated, parts which have been protected by the manufacturer
must not be adjusted by the installer.
Take care when moving an appliance fitted with castors.
The appliance must be serviced regularly by a qualified person.
Service intervals should be agreed with the service provider.
This appliance may be discolored due to testing.
4