Table of Contents
Advertisement
Final Work
WARNING!
Reassemble the disassembled components in reverse order.
Check all hoses, clamps and all electrical connections for firm seating.
Secure all loose wires using cable ties.
Only use manufacturer-approved coolant.
Spray the heater components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect the battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Adjust digital timer, teach Telestart
- Make settings on A/C control panel according to the "Operating Instructions for End Customer".
- Check the proper functioning of the parking heater, see the operating instructions/installation in-
structions.
- Place signboard "Switch off parking heater before refilling" in the area of the filler neck
1
1314128B_EN
2
3
4
Printed in Germany
Align exhaust end section 4 flush on red (rt)
rubber isolator 2.
1 Underride protection
3 Wheel well trim
60
Webasto AG
Postfach 80
D-82132 Stockdorf / Germany
National Hotline: 01805 93 22 78
(14 Cent aus dem deutschen Festnetz)
Hotfax: 0395 5592 353
Hotmail: hotline@webasto.de
http://www.webasto.de
Suzuki Splash
Feel the drive
06/2011
Printing: Steffen
Fastening
exhaust
end sec-
tion
25
Advertisement
Table of Contents
