Entering And Exiting Setup Mode; Changing Setup Values - HP HP700/22 User Manual

Entering and Exiting Setup Mode
To enter Setup Mode, press the
[Setup [
key. The first Setup menu temporarily replaces
whatever data had been on the screen. The screen contents will be redisplayed when you
exit Setup Mode (unless you use a field in Setup Mode that clears the display).
If Xon/Xoff handshaking is enabled (it is by default), the computer stops scnding data to
your terminal until you exit Setup Mode. Thus, no incoming data will be lost.
To exit Setup Mode, press the
[Setup
I key again. The display reverts back to how it had
been when you entered Setup Mode.
Changing Setup Mode Values
The terminal is shipped from the factory with default values ready for power-on use.
The labels displayed at the bottom of each Setup menu indicate the keys that you will
use to change your terminal's setup.
[Next Screenl=NExt Setup <arrows>
Enter=Select Setup=EXl t
1.
Access a menu that contains fields you want to change. The General Setup Menu is
the first Setup menu displayed. You can cycle through the Setup Menus by pressing
the [
Next Screen
I key.
2.
Select the field you want to change by pressing the arrow (cursor movement) keys.
A field is highlighted when it is selected.
3.
Press the
~
key to change a highlighted value or to perform a Setup action.
4.
When finished making changes and performing functions in the Setup menus, press
the
I
Setup
I
key to exit Setup Mode.
Table 2-2 explains the use of these keys in more detail.
Terminal Setup 2·3