Communications Setup Menu - HP HP700/22 User Manual

Communications Setup Menu
The Communications Setup Menu lets you make whatever setup changes are necessary
for communicating with your computer. If a printer is connected to your terminal, this
menu also lets you set your terminal for proper communications with the printer.
Table 2-4 describes the fields in the Host section (communications with the computer) of
the menu. Table 2-5 describes the fields for the Printer communications section of the
menu. Default values are shown in the illustration below and listed first in the tables.
Host
Xmlt Baudrate
Recv Baudrate
DataBI ts/Pan ty
Check Pardy
Port Select,on
PrInter
Baudrate
DataBI ts/Pan ty
stop BIts
Character Set
COMMUNICATIONS SETUP
!:
.
.-
;;;.1114
XON/XOFF
D,sconnect Delay
Stop BIts
Local Echo
Unllmded Xmd
PrInt Mode
r
PrInt Scroll RegIon , __ "
TermInator
INext Screenl=Next Setup <arrows> IEnterl=Select ISetupl=Exlt
2·10 Terminal Setup