Platen Glass - Canon MF247dw User Manual

Platen Glass

Regularly wipe off the dust from the platen glass and the underside of the feeder to prevent smudges to be printed on
documents or printouts.
Scanning area cleaning
To display a message when soiling is detected on the scanning area, set
<Notify to Clean> to <On>.
1
Turn OFF the machine, and unplug the power cord from the AC power outlet.
● When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were
received by using the Memory Reception function, faxes that are waiting to be sent, and reports that are
automatically printed after sending and receiving faxes are not deleted.
2
Open the feeder.
3
Clean the platen glass and the underside of the feeder.
● Clean the areas with a cloth dampened with water. Then, wipe the area with a soft, dry cloth.
● In addition to the platen glass and underside of the feeder, make sure to clean and wipe the white strip of
plate ( ) and the surface of the transparent plastic part (
Maintenance
), too.
592
1469-09Y