Configuring Scan Settings (Sending E-Mail) - Canon MF247dw User Manual

Configuring Scan Settings (Sending E-Mail)

Before configuring the machine for scanning to e-mail, check the setup flow shown below.
Network
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN (MF249dw / MF247dw)(P. 319)
Connecting to a Wired LAN(P. 318)
Make sure that you have the following information:
● The IP address of the machine.
● An e-mail address to be registered as a destination.
● Information about the e-mail server, including the SMTP server name, port
numbers, whether authentication is required, and the user name and password
for authentication.
● For more information about the e-mail server settings, contact your Internet
service provider or Network Administrator.
Make sure that the computer meets the following system requirements for the
Send Setting Tool(sending e-mail):
● Operating system
Windows Vista/7/8/10/Server 2008/Server 2012
● Web browser
Microsoft Internet Explorer 7.0 or later
● Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at
least 256 colors
● Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication (P. 423)
Disabling Remote UI (P. 424)
Set the machine configuration.
● Configuring Basic E-Mail Settings
● Configuring E-Mail Receiving Settings
Settings(P. 363)
● Configuring Detailed E-Mail Communication Settings (Authentication, Encryption,
etc.) Configuring E-Mail Communication Settings(P. 363)
358
Viewing Network Settings(P. 344)
Configuring Basic E-Mail Settings(P. 359)
Configuring E-Mail Communication
1469-06U