Canon MF247dw User Manual page 305

Enter the name and the installation location information to help you identify this machine when operating
your Apple device. This information is useful if you have more than one AirPrint printer. Also select whether
to give priority to print speed or to print quality.
If you select the [Use AirPrint] check box
The following items are also set to <On> automatically.
● <mDNS Settings> for IPv4 and IPv6
● <Use HTTP>
● [Use IPP Printing] under [IPP Print Settings]
AirPrint(P. 297)
● <Use Network Link Scan>
If you change [Printer Name]
● If you change [Printer Name] that you have once specified, you may be unable to print any more from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name>
( Configuring DNS(P. 377) ) of IPv4 is also changed automatically. In this case, add the machine to the
Mac again.
◼
Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the
necessary setting using the operation panel or Remote UI.
Changing Print and Fax Settings
To perform printing or fax sending with AirPrint, IPP protocol is used.
Turning the function On/Off
You can specify whether to perform printing and fax sending with AirPrint. The factory default setting is [On].
Log on to the Remote UI in System Manager Mode (
UI(P. 450) )
Settings]
Changing the TLS setting
You can specify whether to encrypt communications using TLS when performing printing or sending faxes with
AirPrint. The factory default setting is [On].
● When the machine is connected to a Mac via USB, set [Use TLS] to [Off].
Log on to the Remote UI in System Manager Mode (
UI(P. 450) )
Settings]
Can Be Used Conveniently with a Mobile Device
Configuring DNS(P. 377)
Disabling HTTP Communication (P. 423)
Changing the Setting of Functions Available with AirPrint(P. 297)
[Settings/Registration]
[Edit] Clear or select the [Use IPP Printing] check box
[Settings/Registration]
[Edit] Clear or select the [Use TLS] check box
Changing the Setting of Functions Available with
Starting Remote
[Network Settings]
Starting Remote
[Network Settings]
297
[TCP/IP Settings] [IPP Print
[OK]
[TCP/IP Settings] [IPP Print
[OK]