Canon MF247dw User Manual page 258

8
Press to start sending.
➠
Scanning of the document starts.
● To cancel sending, tap <Cancel>
(P. 256)
When placing documents in the feeder in step 1
When scanning is complete, the e-mail is sent.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedures below (except if you selected JPEG as a file format in step 6).
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press .
● Repeat this step until you finish scanning all of the pages.
● When there is only one page to be scanned, proceed to the next step.
2
Tap <Start TX>.
➠
The e-mail is sent.
If a Send Error Occurs
Error notifications are sometimes sent to the e-mail address set to the machine. If you leave it as-is, it may
result in an insufficient remaining capacity of mailbox depending on your mail server. It is recommended that
you clear the mailbox periodically.
To clear the mailbox
● When the mailbox is cleared, all e-mail in the server mailbox is deleted. When you specify the e-mail
account that you use usually, you should first check whether any e-mail in the mailbox needs to be kept.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
Using the Machine as a Scanner
<Yes>. Canceling Sending Documents (E-Mail/Shared Folder)
250
Starting Remote UI(P. 450)