●
To check the settings registered in the button, see
●
Scanning starts.
●
To cancel, tap <Cancel>
You cannot scan while the ScanGear MF is displayed. Close the
screen before scanning.
When placing documents in the feeder in step 1
When scanning is complete, the save destination folder is displayed on the computer.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedure below (when file format is PDF).
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
2
Tap <Finish Scan>.
●
The save destination folder is displayed on the computer.
About the save destination folder
●
By default, the scanned data is saved to the [My Documents] folder. A subfolder named with the scanning
date is created, and the data is saved to that folder.
●
You can change the save destination from MF Scan Utility. For more information, click [Instructions] on MF
Scan Utility.
LINKS
Scanning from the Machine(P. 234)
Using the Machine as a Scanner
<Yes>.
.
Checking the Registered Settings(P. 239) .
240