3
Select a destination.
4
Specify the scanning settings as necessary.
●
Select the settings.
5
Press
to start sending.
●
Scanning starts.
●
If you want to cancel sending, press
When placing documents in the feeder in step 1
When scanning is complete, the faxes are sent.
When placing documents on the platen glass in step 1
Follow the procedures below.
1
Select the document size.
●
When there is only one page to be scanned, proceed to step 3.
2
Place the next document on the platen glass, and press
●
Repeat this step until you finish scanning all of the pages.
3
Tap <Start TX>.
●
The faxes are sent.
Faxing
Various Fax Settings(P. 133)
Tap <Yes>.
.
118