Special Print Mode
Select <Special Settings 1> if a printed bar code is unreadable, or <Special Settings 2> if print results are partially
faded.
Off
Special Settings 1
Special Settings 2
<Menu>
1> or <Special Settings 2>
*1
Resolution
Specify the resolution to be used for print data processing.
1200 dpi
600 dpi
<Menu>
dpi>
Density Fine Adjustment
Finely adjust the density. You can specify this setting only when <1200 dpi> is selected in <Resolution>.
-1 to 0
to 1
<Menu>
*1
Layout
Specify the page layout settings such as binding position.
Binding Location
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind on
the long or short edge.
Long Edge
Short Edge
Setting Menu List
*1
<Printer Settings>
<Print Quality>
<Printer Settings>
<Print Quality>
*1
<Printer Settings>
<Print Quality>
<Special Print Mode>
<Resolution>
<Density Fine Adjustment>
517
Select <Special Settings
Select <1200 dpi> or <600
Specify the density